目前分類:Learn (19)

瀏覽方式: 標題列表 簡短摘要
[gallery columns="1" size="large" ids="3800"]

This article is reproduced from CAVEDU education blog with permission.






tttt 發表在 痞客邦 留言(0) 人氣()

本教學將教您如何在 QNAP QIoT Suite Lite 儀表板中使用  Historic Chart Widget

[gallery columns="1" size="large" ids="3577"]

  1. 新增一個 QBroker 節點,並設定好資料 (參考" 如何使用 QIoT Suite Lite 儀表板 (從 v1.1.1 升級到 v1.1.2 )" )

tttt 發表在 痞客邦 留言(0) 人氣()

In this tutorial, your will learn how to use QNAP QIoT Historic Chart Widget of dshboard.


[gallery columns="1" size="large" ids="3606"]

tttt 發表在 痞客邦 留言(0) 人氣()

本教学将教您如何在 QNAP QIoT Suite Lite 仪表板中使用  Historic Chart Widget

[gallery columns="1" size="large" ids="3588"]

  1. 新增一个 QBroker 节点,并设定好数据 (参考" 如何使用 QIoT Suite Lite 仪表板 (从 v1.1.1 升级到 v1.1.2 )?" )

tttt 發表在 痞客邦 留言(0) 人氣()

In this tutorial, you will learn how to set up IFROGLAB LORA GATEWAY on QNAP/ IEI

Step 1

Please insert the plug-in from the iFrogLab LoRa USB device into the QNAP or IEI device, make sure the device is in the same internet environment as your PC.

tttt 發表在 痞客邦 留言(0) 人氣()

In this tutorial, you will learn how to install openHAB in QNAP Container Station and create a "Home automation" environment.

There are two part of this tutorial:

  • Basic installation

tttt 發表在 痞客邦 留言(0) 人氣()

In this tutorial, you will learn three methods for backing up QIoT Suite Lite:

  1. Only Node-RED backup
  2. IoT Application backup (includes dashboard, rules, things)
  3. System-wide backup(advanced)

tttt 發表在 痞客邦 留言(0) 人氣()

In this tutorial, you will learn how to connect to QIoT Suite Lite using HTTP.

Refer to the following tutorial to learn how to connect different development boards to QioT Suite Lite: https://www.qnap.com/go/how-to/tutorial/qiot-suite-lite

Refer to the following link to learn how to establish IoT Application and Things: https://www.qnap.com/go/how-to/tutorial/article/how-to-show-dht11-data-on-qiot-dashboard

tttt 發表在 痞客邦 留言(0) 人氣()

In this tutorial, you will learn how to connect to QIoT Suite Lite using HTTPS.

Refer to the following tutorial to learn how to connect different development boards to QioT Suite Lite: https://www.qnap.com/go/how-to/tutorial/qiot-suite-lite

Refer to the following link to learn how to establish IoT Application and Things: https://www.qnap.com/go/how-to/tutorial/article/how-to-show-dht11-data-on-qiot-dashboard

tttt 發表在 痞客邦 留言(1) 人氣()

In this tutorial, you will learn how to connect to QIoT Suite Lite using MQTT.

Refer to the following tutorial to learn how to connect different development boards to QioT Suite Lite: https://www.qnap.com/go/how-to/tutorial/qiot-suite-lite

Refer to the following link to learn how to establish IoT Application and Things: https://www.qnap.com/go/how-to/tutorial/article/how-to-show-dht11-data-on-qiot-dashboard

tttt 發表在 痞客邦 留言(0) 人氣()

In this tutorial, you will learn how to connect to QIoT Suite Lite using MQTTS.

Refer to the following tutorial to learn how to connect different development boards to QioT Suite Lite: https://www.qnap.com/en/how-to/tutorial/qiot-suite-lite

Refer to the following link to learn how to establish IoT Application and Things: https://www.qnap.com/go/how-to/tutorial/article/how-to-show-dht11-data-on-qiot-dashboard

tttt 發表在 痞客邦 留言(0) 人氣()

Step:

  1. Connect to your NAS via SSH.
  2. Enter the command "system-docker exec -ti qiot-node-red bash".
  3. Go to the node-red directory: "cd /usr/local/lib/node_modules/node-red"

tttt 發表在 痞客邦 留言(0) 人氣()

In this tutorial, you will learn how to connect to QIoT Suite Lite using CoAP.

Refer to the following tutorial to learn how to connect different development boards to QIoT Suite Lite: https://www.qnap.com/en/how-to/tutorial/qiot-suite-lite

Refer to the following link to learn how to establish IoT Application and Things: https://www.qnap.com/en/how-to/tutorial/article/how-to-show-dht11-data-on-qiot-dashboard

tttt 發表在 痞客邦 留言(0) 人氣()

Get started with Arduino Yun (Python)


In this tutorial, you will learn the basics of working with Arduino Yun (that runs Linux). You will then learn how to seamlessly connect your devices to QNAP NAS using QIoT Suite Lite. This example is uses the DHT11 humidity and temperature sensor.


1. Configure your devices


tttt 發表在 痞客邦 留言(0) 人氣()

This tutorial covers setting up a Grove Indoor Environment Kit followed by connecting the devices to QIoT Suite Lite.


Setup your Grove Indoor Environment Kit for Intel Edison


1.1 What you will need


tttt 發表在 痞客邦 留言(0) 人氣()

An IFTTT account is required to use this feature.

Step 1: Establish a "maker webhook" connection:

  1. Go to log in to the IFTTT website and go to : https://ifttt.com/maker_webhooks

tttt 發表在 痞客邦 留言(0) 人氣()

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. This tutorial will show how to display - DHT11 data on QIoT Dashboard (using a Seeeduino with W5500 Ethernet Shield).



  1. "IoT Applications" → "Add IoT applications"

tttt 發表在 痞客邦 留言(0) 人氣()

1.1 Get your first Power BI account


tttt 發表在 痞客邦 留言(0) 人氣()

Get started with Raspberry Pi (Nodejs)




In this tutorial, you will learn the basics of working with Raspberry Pi (that runs the Debian-based Raspbian). You will then learn how to connect your devices to QNAP NAS using QIoT Suite Lite.

Please ensure your Raspberry Pi and NAS are on the same LAN.


tttt 發表在 痞客邦 留言(0) 人氣()