目前分類:QIoT (41)

瀏覽方式: 標題列表 簡短摘要
[gallery size="full" columns="1" ids="2370"]

CAVEDU is a famous education team in maker community, which focuses on robot education and the research of development board. Therefore, those who are interested in maker would usually choose  their works as guidelines. The team member, Tseng Chi-Hung is a pioneer of domestic maker activities and IoT education. Besides, he is also prolific  and enthusiastic to share new technology. Here is the link of CAVEDU channel, which collecting lots of slide lectured by Tseng.

He used to talk about the difficulties in establishing IoT classrooms:

tttt 發表在 痞客邦 留言(0) 人氣()

2018 Future Commerce had take place on Taipei Expo Park from April 26 to 29.“Beyond Boundary”,the theme of this year, was aimed at breaking the industry deadlock of Taiwan. This exhibition attracted nearly 100 enterprises to demonstrate their latest technologies and new business models.

[gallery size="full" ids="2074,2072,2071"]

“Maker Market”was one of the topic among the various issues. Due to the  maturity of open source software, hardware and community, makers can easily share information and constantly bring forth new ideas into market. Iiterally, the formation of“Maker Economy”had become a mainstream.

tttt 發表在 痞客邦 留言(1) 人氣()

In this tutorial, you will learn how to send data from the iFrogLab LoRa Gateway to QNAP QIoT Suite Lite.

 

Prepare


Set up the iFrogLab LoRa USB to QIoT Suite Lite and iFrogLab LoRa Gateway Container. Setup steps can be found at http://www.ifroglab.com/en/?p=6613  (If in Step 10 the expected output is not displayed, using SSH to access the NAS and enter the following commands:

tttt 發表在 痞客邦 留言(0) 人氣()

 

In this tutorial, you will learn how to use MQTT to transmit and receive data to QIoT Suite Lite using an ESP8266. As the ESP8266 has different firmware, specifications and instructions, there are two common methods:

  • ESP826 useing Arduino Core

tttt 發表在 痞客邦 留言(0) 人氣()

In QIoT Suite Lite v1.1.111, it has avoided some well-known port (e.g., http-8080, https-443), but it will also confront some specific problems. Thus, we list some port for QIoT Suite Lite v1.1.111 used to avoid conflict.

There are some ports been listed as follow to provide interior system to connect with outer devices (Port of Qgateway must be connect with outer connection, in this way, it can connect with devices)


tttt 發表在 痞客邦 留言(0) 人氣()

How to receive Sigfox data from QNAP QIoT Suite Lite


 

In this tutorial, you will learn how to receive Sigfox data from QNAP QIoT Suite Lite.

tttt 發表在 痞客邦 留言(0) 人氣()

Abstract


The Internet of Things is used in a wide range of applications, and in combination with smart home devices (such as electrical appliances, air quality detectors, thermometers, and air conditioners) can make your home smarter.

In this tutorial we will show you how to use QBoat Sunny to enable voice control.

tttt 發表在 痞客邦 留言(2) 人氣()

How to use historical data access API on QNAP QIoT Suite Lite


 

In this tutorial, you will learn how to use historical data access API on QNAP QIoT Suite Lite. Using the historical data access API, the limitation is that you have to create a thing on QIoT and confirm the data input type is numeric (int, float), and then it can output in count, sum, vmin, vmax, and vavg type normally.

tttt 發表在 痞客邦 留言(2) 人氣()

How to use Mass Deployment on QNAP QIoT Suite Lite


Mass deployment can help you upload infromation & resourceinfo.json, and commands via SSH to multiple devices ( Only for devices support SSH with port number 22 )

 

Setting Device connection


tttt 發表在 痞客邦 留言(0) 人氣()

Integrating Home Assistant into your QNAP X86 System NAS


Home Assistant is an open-source home automation platform running on Python 3 and Raspberry Pi. It is very easy and beneficial to combine QNAP X86 System NAS and Home Assistant.

Notes : This tutorial only support on X86 system NAS, If you want to use it on ARM system, You should build docker image yourself, or search Home Assistant for ARM version on docker hub.

tttt 發表在 痞客邦 留言(9) 人氣()





tttt 發表在 痞客邦 留言(0) 人氣()

In this tutorial, you will learn three methods for backing up QIoT Suite Lite:




  1. Only Node-RED backup

tttt 發表在 痞客邦 留言(0) 人氣()

How to install other modules in QIoT Suite Lite NodeRED?


 Step:

  1. Connect to your NAS via SSH.
  2. Enter the command "system-docker exec -ti qiot-node-red bash".

tttt 發表在 痞客邦 留言(2) 人氣()

mongodb qiot

In this tutorial, you will learn how to establish a MongoDB to connect with QNAP NAS via QIoT Suite Lite.



Step_1: Open Container Station and Set Up MongoDB


tttt 發表在 痞客邦 留言(0) 人氣()

In QIoT Suite Lite v1.0.41, it has avoided some well-known port (e.g., http-8080, https-443), but it will also confront some specific problems. Thus, we list some port for QIoT Suite Lite v1.0.41 used to avoid conflict.

There are some ports been listed as follow to provide interior system to connect with outer devices (Port of Qgateway must be connect with outer connection, in this way, it can connect with devices)

 

tttt 發表在 痞客邦 留言(0) 人氣()





tttt 發表在 痞客邦 留言(0) 人氣()

Using the Node-RED Dashboard:

1. "Layout": Displays the results of output
2. "+Tab" : Add a new tab (for example: Tab1,Tab2)
3. Each tab can have many groups (for example: Basic Information, Other, QIoT Introduction)

tttt 發表在 痞客邦 留言(0) 人氣()

How to connect QIoT Suite Lite and IFTTT to send and show data on mobile devices.

An IFTTT account is required to use this feature.

Step 1: Establish a "maker webhook" connection:

tttt 發表在 痞客邦 留言(0) 人氣()

In this lesson, we will introduce how to solve the problem that cannot login afterr upgrade from QIoT Suite Lite v0.9.0 to QIoT Suite Lite v1.0.09. Since the Cookie Path of v0.9 and v1.0 is different; thus you have to clean a cache and login again that you can get into the QIoT Application. The following are the solution steps:

1. When you login that appearing the following screen:
1

tttt 發表在 痞客邦 留言(0) 人氣()

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. This tutorial will show how to display - DHT11 data on QIoT Dashboard (using a Seeeduino with W5500 Ethernet Shield).
DHT 11

1.  "IoT Applications" →  "Add IoT applications"
1

tttt 發表在 痞客邦 留言(4) 人氣()

1 23