How to setup AWS Greengrass on QNAP NAS?


 

 

                                                        qpkg_100

 

 

In this tutorial, you will learn how to setup AWS Greengrass on QNAP NAS. 

 

Install AWS Greengrass 

 

Go to QTS App Center, find "AWS Greengrass" and click "install"

5



     

Configuring AWS Greengrass on AWS IoT cloud

 

To configure AWS Greengrass on AWS IoT,  refer to :

https://docs.aws.amazon.com/greengrass/latest/developerguide/gg-config.html

 

 (* You do not need to  download "Greengrass Core software", as it is included in the AWS Greengrass App)

 


     


       1

 

 

Download AWS IoT root CA and rename it to "root.ca.pem"

 




     


 

 

 

 

 

 

Upload Greengrass Core CA, Cert and Key to AWS Greengrass Core application

 

Open AWS Greengrass on your QNAP NAS

In "Greengrass settings file", choose "xxxxxx-setup.tar.gz" and click "Upload"

In "AWS IoT root CA", choose "root.ca.pem" and click "Upload"
 

4

 

Click "Start"

Go to "Status". The status should display "Greengrass successfully started"

 


     

Test function 1. Create two Devices (one is a Publisher and the other one is a Subscriber)

 

Follow the steps of "Module 4: Interacting with Devices in an AWS Greengrass Group", on the following page :

 https://docs.aws.amazon.com/greengrass/latest/developerguide/module4.html

(*If following message is displayed, the sample code is trying to connect through all the IP address on Greengrass Core)

 


     

2

        

(*If following message is displayed, you may have entered the wrong command or certificate)


3

 

 

 

 

Test function 2. AWS Lambda running on Greengrass Core

 

Follow the steps of "Module 3 (Part 1 & Part 2)  AWS Lambda on AWS Greengrass", on following page:

https://docs.aws.amazon.com/greengrass/latest/developerguide/module3-I.html 

https://docs.aws.amazon.com/greengrass/latest/developerguide/module3-II.html

 


     

Support model:

 

ARM-based NAS requires at least 1 GB RAM and QTS 4.3.4 or later:
x31P: TS-431P, 
 TS-231P,  TS-131P
x31P2: TS-231P2,  TS-431P2

x86-based NAS (Intel and AMD processor) requires at least 1 GB RAM and QTS 4.3.0 or later

 


     

To learn more about AWS Greengrass,  refer to the following page:  
https://aws.amazon.com/documentation/greengrass/

 

arrow
arrow

    tttt 發表在 痞客邦 留言(0) 人氣()