How to set up IFROGLAB LORA GATEWAY on QNAP/ IEI－觀察筆記

In this tutorial, you will learn how to set up IFROGLAB LORA GATEWAY on QNAP/ IEI

Step 1：

Please insert the plug-in from the iFrogLab LoRa USB device into the QNAP or IEI device, make sure the device is in the same internet environment as your PC.

iFrogLab LoRa can work under 3 LoRa device

iFrog LoRa IL-LoRa1272 and USB to port

iFrog LoRa node and USB to serial

liFrog LoRa USB[gallery columns="2" size="full" ids="2532,2533"]

Step 2：

Install Qfinder

[gallery columns="1" size="full" ids="2561"]

Step 3：

Open Qfinder，and click your device on the network list to open the Admin back-end qts system step

[gallery columns="1" size="full" ids="2535"]

Step 4：

Log in QTS，make sure the default username and password are both “admin”

[gallery columns="1" size="full" ids="2536"]

Step 5：

Click App enter in QTS , search and download “Container Station”

[gallery size="full" columns="1" ids="2537"]

Step 6：

Open“Container Station” > click “Build Container” > enter “ifroglab” on search bar >download iFrogLab LoRa Gateway Container

Or you can download in SSH command $ docker pull ifroglab/loragateway:latest[gallery columns="1" size="full" ids="2538"]

Step 7：

Install SSH software on your PC

Windows PuTTY

Mac terminal

Linux terminal[gallery columns="1" size="full" ids="2539"]

Step 8：

Open SSH or PuTTY，Open QNAP or iEi device IP address 192.168.0.110

The default username and password of QNAP QTS are both “admin”

[gallery columns="1" size="full" ids="2540"]

Step 9：

Check Lora USB or USB to serial Linux driver is working correctly

$ ls /dev/tty*

if working, you should get:

/ dev / ttyAMC0

/ dev / ttyUSB0

[gallery columns="1" size="full" ids="2541"]

Step 10：

Execute LoRa gateway thoght below command

$ docker run -p 82:80 -p 3306:3306 –device=/dev/ttyACM0 -i -t ifroglab/loragateway:latest /loragateway.sh

or

$ docker run -p 82:80 -p 3306:3306 –device=/dev/ttyACM0 -i -t ifroglab/loragateway:latest /loragateway.sh

Change "/ dev / ttyACM0" to the device name of step 10.

82:80 is the front-end website port number 82.

Step 11：

Open the browser and link to http://QNAP IP address:82 (for example, http:///192.168.0.110:82)

[gallery columns="1" size="full" ids="2542"]

success!

For LoRaNode, see LoRaNode Tutorial